|
A, use conditions
DB - N (ZB series of multi-point lubrication pump is suitable for lubrication lower frequency, lubricating points in 50 points, nominal pressure for the single medium type 31.5 MPa concentrated lubrication system of mechanical equipment, directly or through wired distributor to all lubricating points for the transmission device. Grease injection
This pump is suitable for metallurgy, mining, ports, transportation, construction and other equipment.
Second, the technical parameters
|
Type
|
The nominal pressure(MPa)
|
Oil storage capacity(L)
|
The nominal flow(mL/min)
|
Motor
|
Weight(kg)
|
|
Power(kW)
|
Voltage(V)
|
|
DB-N25
|
31.5
|
30
|
0～25
|
0.37
|
380
|
37
|
|
DB-N45
|
0～45
|
39
|
|
DB-N50
|
0～50
|
37
|
|
DB-N90
|
0～90
|
39
|
Use medium for the cone not less than 25 ° c, 150g 265 (1) the grease or 10mm level N68 lubricant viscosity, working environment temperature for - 20 ~ 80 ° c.
Third, the model shows
Four, graphic symbols
.jpg)
Five, the instructions
1, more lubrication pump should be installed in the environment temperature, dust, grease filling less inspection, maintenance is convenient.
2, the reservoir in grease filling the pump must use from the reservoir of fuel injection, forbidden cover mouth off to join the working medium of the filter.
3, according to the reservoir inner topspin to spin to the provisions on motor connection, not reversed.
4, oil can be in 1 ~ mouth number 14, according to choose within the scope of the equipment need not plunger pump components can be removed by screw holes, with M20 x 1.5 screw sealing. |
